SWD8009 amacandelo amabini ukutywina ukungena kwikhonkrithi ekhethekileyo ye-polyurea primer
Iimpawu zemveliso kunye neenzuzo
* ukwandisa kakhulu amandla okubambelela kwi-concrete substrate kunye neengubo
* i-viscosity ephantsi, i-fluidity ephezulu
* Utywino olugqwesileyo kunye nepropathi yokungena
* ipropathi egqwesileyo ye-anticorrosion
* egqwesileyo ukumelana nokufuma kwamanzi
* Ukumelana okuzinzileyo nokutshintsha kobushushu
* iyahambelana nale filim ilandelayo yokugquma
* Waphephe amaqamza kwaye wandise ubomi benkonzo
* izinga eliphezulu lokhuseleko ukonga iindleko
Imida yosetyenziso
I-Substrate surface anticorrosion coating ye-concrete, i-marble, iithayile ze-ceramic kunye neenkuni.
Ulwazi lwemveliso
| Into | Ilungu | B icandelo |
| Imbonakalo | ulwelo olumthubi olukhanyayo | Umbala unokuhlengahlengiswa |
| Umxhuzulane okhethekileyo(g/m³) | 1.02 | 1.05 |
| Viscosity (cps)@25℃ | 220 | 260 |
| Umxholo oqinileyo (%) | ＞60% | ＞60% |
| Mix ratio (ngokobunzima) | 3 | 2 |
| Ixesha lokoma komhlaba (h) | 1-3 h | |
| Isithuba sokubuyisela kwakhona (h) | Min 3 h;ubuninzi 24h (20℃) | |
| Inkcazo yethiyori (DFT) | 0.09kg/㎡ ubukhulu befilimu 50μm | |
Iimpawu ezibonakalayo eziqhelekileyo
| Into | Umgangatho wovavanyo | Iziphumo |
| Amandla okuqina (umphezulu wekhonkrithi owomileyo) uMpa | I-ASTM D-3359 | 3.5 (okanye i-substrate yaphukile) |
| Ukuchasana nempembelelo (kg.cm) | GB/T 1732 | 60 |
| Ukuxhatshazwa kwe-abrasion (750g / 500r) mg | GB/T 1732 | 11 |
| Ukutshintsha kobushushu (-40+180℃) 24h | GB/9278-1988 | Okuqhelekileyo |
| Ubuninzi be-g/cm3 | GB/T 6750-2007 | 1.02 |
Ukumelana nemichiza
| Ukumelana ne-Acid 40% H2SO4 okanye 10%HCI,30d | akukho mhlwa, akukho amaqamza, akukho kuxobuka |
| Ukumelana ne-alkali 50% NaOH, 30d | akukho mhlwa, akukho amaqamza, akukho kuxobuka |
| Ukumelana netyuwa 50g / L, 30d | akukho mhlwa, akukho amaqamza, akukho kuxobuka |
| Ukumelana nokutshizwa kwetyuwa 1000h | akukho mhlwa, akukho amaqamza, akukho kuxobuka |
| Ukumelana ne-oyile, i-0 # idizili, i-oyile ekrwada, i-30d | akukho mhlwa, akukho amaqamza, akukho kuxobuka |
| (Ukwenzela ireferensi: Nika ingqalelo kwimpembelelo yokungena komoya, ukuchaphaza kunye nokuchitheka. Uvavanyo lokuntywiliselwa oluzimeleyo luyacetyiswa ukuba lufuna enye idatha ethile) | |
Indawo yosetyenziso
Ubushushu bendawo: -5 ~+ 35℃
Ukufuma okuhambelanayo: RH%:35-85%
Indawo yombethe: ≥3℃
Isikhokelo sesicelo
Cebisa i-dft: 20-40μm
Ukubuyisela ixesha lekhefu: 3-24h
Indlela yokwaleka ecetyiswayo: ibrashi, irola, isitshizi esingenamoya, isitshizi somoya
Inqaku lesicelo
Umphezulu wekhonkrithi kufuneka wome ngokupheleleyo, ucoceke, udibanise, ungabi nagrisi okanye amabala, ukuba kukho ukuqhekeka okucacileyo kunye nommandla wokuphuka, kufuneka ulungiswe kwangaphambili.Qinisekisa ukuba ucoce umphezulu ngokusila komoya okanye indlela yokufunxa phambi kokufaka i-SWD8009.
Le mveliso ingasetyenziswa kubushushu obungaphantsi kwe -10℃.Xa ufaka isicelo kwiqondo lobushushu eliphantsi kakhulu, beka igubu lezinto kwigumbi lokupholisa umoya ngaphezulu kwe24h.
I-SWD incoma ukuphazamisa i-coating efanayo ngaphambi kokufaka isicelo, sebenzisa izinto ezixubileyo ngaphakathi kweyure eli-1.Musa ukugalela ulwelo oluseleyo kwibhakethi yokuqala.
I-viscosity yemveliso imiselwe kwi-factory, i-thinner ayiyi kuba yi-random yongezwa ngabafaki zicelo.Biza umenzi ngemiyalelo yokongeza i-thinner ekhethekileyo ukuba i-viscosity itshintshile kunye nokusingqongileyo kwesicelo kunye nokufuma.
Ixesha lokunyanga imveliso
| Ubushushu be-substrate | Umphezulu ixesha elomileyo | I-traffic ephantsi | Ixesha lokunyanga eliqinileyo |
| +10℃ | 3h | 24h | 7d |
| +20℃ | 2h | 12h | 7d |
| +30℃ | 1h | 8h | 7d |
Beka ubomi kwishelufa
* iqondo lobushushu lokugcina: 5℃-32℃
* Ubomi beshelufu (ukususela kumhla kunye nemveliso kwaye ikwimeko etywiniweyo):
Icandelo A: Iinyanga ezili-12
Icandelo B: Iinyanga ezili-12
* gcina kwindawo epholileyo nengena umoya, kunqande ilanga elithe ngqo, gcina kude nobushushu
* iphakheji: inxalenye A: 25kg/emele, inxalenye B:25kg/emele
Ulwazi lwezempilo kunye nokhuseleko lwemveliso
Ngolwazi kunye neengcebiso malunga nokuphathwa ngokukhuselekileyo, ukugcinwa kunye nokulahlwa kweemveliso zekhemikhali, abasebenzisi baya kubhekisa kwiPhepha leDatha loKhuseleko lweMaterial lamva nje eliqulethe idatha yenyama, yendalo, eyetyhefu kunye nolunye ukhuseleko olunxulumene nokhuseleko.
Isibhengezo semfezeko
Isiqinisekiso se-SWD yonke idatha yobugcisa echazwe kolu xwebhu isekelwe kwiimvavanyo zaselabhoratri.Ezona ndlela zovavanyo zinokwahluka ngenxa yeemeko ezahlukeneyo.Ngoko ke nceda uvavanye kwaye uqinisekise ukufaneleka kwayo.I-SWD ayithathi naluphi na uxanduva ngaphandle komgangatho wemveliso kwaye igcine ilungelo lazo naziphi na izilungiso kwidatha edwelisiweyo ngaphandle kwesaziso sangaphambili.
